Change Area Sign In Register
Home Community Services For Sale Vehicles Real Estate Jobs
    Post Classified 

1998 Supercharged Honda Valkyrie With Many Parts !

1998 Supercharged Honda Valkyrie With Many Parts !
Click on a thumbnail to enlarge:
View & Enlarge All Photos

Posted By:
Jean Elizondo
Posting ID:
Atlanta Ga
 supercharged   honda   valkyrie   with   many   parts 
Atlanta, GA

 Facebook  Twitter  MySpace
Bookmark and Share
Where do I begin on this amazing Valkyrie? Here for your consideration is a 1998 Supercharged Honda Valkyrie. This Valkyrie is truly a one of a kind build. The engine has been bored 1mm or .040 over with a .064 deck clearance. We used J&E ceramic coated 8.5:1 pistons, Crowler rods, crank has been spun and balanced, heads worked on, right side cam worked to turn the msd distributor you see on the right side of the engine. The Supercharger currently puts in about 10 psi, this engine will easily accommodate 22 or 24 psi should you choose to change the pulley. The Valkyrie has a Holley 390 4bbl carburetor that has methanol or water injection along with nitros. The methanol comes on around 7psi, the nitros has a button on the handlebar by the clutch. You will notice 2 pushbuttons next to the clutch clamp. These buttons are for the electric shifter currently not installed. All the electronics are installed, just need to hook up the shifter and plug it in to the cable behind the side cover.

Some of the other things that have been done to this bike is Chrome lowered forks, chrome wheels, chrome rear end, chrome swing arm, gafler brake lines, msd distributor, msd ignition, msd adjustable timing, you can adjust the timing on the fly by the switch on the right trans cover. Ii have not even begun to discuss the paint and the seat. Headlight is VTX 1800.

This Valkyrie is extremely fun to ride and turns heads most anywhere is goes. I will list all the extra parts that I will give to the new owner. They are part aside from the Valkyrie parts I generally sold. Parts that I thought would be good to have on hand Justin case and a few things that I was going to install but just did not get around to it.

Matching Helmet.
Superbrace for front forks.
2 ujoints.
2 drive shafts.
2 rear ends.
Cobra Radiator side covers.
Cobra rear fender rails.
Chrome front rotors.
Chrome front and rear wheel.
Timing belts.
Extra Chrome side covers.
2 Honda Valkyrie motorcycle covers, one new in the box.
New alternator.
New Alternator Cover.
Chrome rear caliper and bracket.
Front calipers.
2 radiators.
Pair of heads.
Set of rebuilt forks.
Front fender.
Fuel tank.

I have more parts but these mentioned items will go with the bike unless negotiated away for a lower price. You may not need any of these parts but some will be good to have on hand while owning a performance bike such as this one.

Contact Poster
* Your Email:
* Message:
* = Required information.

Related Posts

  Areas Safety Tips Tell A Friend Link Us Contact Us  

© 2022 - All Rights Reserved.