( not a production or kit bike or catalog parts bike) rigid frame 96in S&S just been rebuilt with dark horse crank work 10.8:1S&S 585 cam for more info must call has been heat cycled and has 30 miles on the engine the bike has 1030 miles on it and a 6speed trans kicker no starter but you can add one if you would like for around 400.00 The frame has a rake of 34 degrees with a 4" stretch down tubes. The steel tubing is 1026 DOM. The legs are 1.250" OD with .125" thick wall. The backbone and seat post is 1.500" OD with a .187" thick wall. The frame has a 1/2" offset. metzeler 200 MM tire with a1.5 " belt . . This frame is made in the USA. The rear rim is a 60 spoke 18" x 5.5 and the front is a 60 spoke 21" x 2.15. The front end is 2" over stock and has 41 mm tubes and chrome plated lower legs and chrome plated billet aluminum trees. 6 Speed kicker is POLISHED with chrome trap door. FEATURES full size back cut gears. 32 tooth pulley installed,CHROME top and SIDE COVER 1st-2.94 2nd-2.21 3rd-1.60 4th-1.23 5th-1.00 6th-0.86 With this gearing you get lower rpms on the highway, hand made fender- seat- dash -gas filter and all mounts 6 gallon gas tank , internal throttle, hand tooled leather seat with Nasa foam. the dash is aluminum and hand tooled leather, gas filter is hand made glass, s&s e carb, 4 piston brake calipers , led brake light hand made bracket , z man hand and foot controls custom made, hammer 6"risers and grips billet aluminum paint was done by Auto Art in prescott . have 20,000 in it and will let it go for cheap make me an offer ..... i am easy to work with no test rides not a show bike has some blems must see must sell i would love to keep it but it has to go i am a working pro wrench . if you have any questions call me at 928-420-4630 robert for more pic