Change Area Sign In Register
Home Community Services For Sale Vehicles Real Estate Jobs
    Post Classified 

1968 Bmw R60us

1968 Bmw R60us
Click on a thumbnail to enlarge:
View & Enlarge All Photos

Posted By:
PostI Gv55
Posting ID:
Idaho Falls, Id
 bmw   r60us 
ID 83415

 Facebook  Twitter  MySpace
Bookmark and Share
A stunning classic airhead.

A completely restored motorcycle done by professionals at APEX BMW/ Ducati.

The bike was completed in July of 2013 and now has 1200 miles on the finished product.

This is a no expense spared complete re-build, using original and some new old stock parts.

The frame, swing arm, cylinders and miscellaneous parts were powder coated.

All of the painted parts have fresh paint, and as necessary the correct hand pin striped accents.

The engine was completely disassembled and rebuilt.

The top end included rebuilding the cylinder heads, new valve guides and seats, new valve springs, new pistons, new piston rings, as well as 4 new pushrod tubes.

The lower end of the motor has new crank bearings, camshaft bearings, a new sport camshaft.

New cam nose bearings, new slingers, new valve covers, new clutch friction plate, a new clutch spring, as well new assembly parts and of course all new gaskets and seals.

The crankshaft and the driveshaft were rebuilt to original spec.

The cylinders were re-bored to first oversize.

The gearbox was completely re-built with new bearings, seals, shims, and bushings.

The rear drive got new crown and pinion bearings and seals.

The suspension front and rear was rebuilt with all new old stock parts when needed, and has all new bearings seals and gaskets.

Rear swing arm bearings and seals are new. Also a new U.S. steering damper.

A complete tune up included carburetor rebuild with new parts, and the correct adjustments for the new BMW sport camshaft timing.

A new air cleaner housing with choke, new air filter and O rings.

New wiring harness and necessary electric parts.

Electrical and charging system has been upgraded to a new 12 volt conversion.

New magneto ignition coil and terminal board.

New Hella OEM bar end signals.

New Bumm mirrors, new switches, new switch bases etc.

Wheels were rebuilt with new bearings, seals, spokes, brake shoes and tires.

Reproduction exhaust system correct for R60.

New Denfield seats.

New Baggage Porters from Germany.

Many other miscellaneous parts too numerous to mention, nothing overlooked.

Contact Poster
* Your Email:
* Message:
* = Required information.

  Areas Safety Tips Tell A Friend Link Us Contact Us  

© 2016 - All Rights Reserved.