Change Area Sign In Register
Home Community Services For Sale Vehicles Real Estate Jobs
    Post Classified 

Kobalt Air Compressor 26 Gallon & Ramsond #rmm3 Floor Nailer / Stap

Kobalt Air Compressor 26 Gallon & Ramsond #rmm3 Floor Nailer / Stap
Click on a thumbnail to enlarge:
View & Enlarge All Photos

Posted By:
Larry Hinckley
Posting ID:
Loami, Il
 air   compressor   floor   nailer 
Item Category:Tools
Brand:Kobalt - Ramsond

 Facebook  Twitter  MySpace
Bookmark and Share
I have a Brand New Kobalt Air Compressor 26 Gallon VLK1582609 for sale. I bought this from Lowes last year to put in a hardwood floor,
but sub-flooring was not suitable for the nailer! This compressor comes with 25 feet of air hose, impact wrench, 3/8" ratchet, nail gun, air hammer, spray gun, tire inflator. Also included were some nails/brads, 2 bits for the air hammer and grinder stones. Here are some facts-Amps:15 Power Supply:120 voltRPM:3,900Volts:120Air Displacement:6.0 CFM @ 40 PSI, 4.0 CFM @ 90 PSIStart/Stop Control:Start @ 125 PSI, Stop @ 155 PSITank Capacity:26-gallonsWeight:118 lbs.Lubrication:Oil freeRecovery Time:2 minutes 56 seconds. I paid $299. Now for the
Ramsond #RMMS Floor Nailer/ Stapler, I paid $200 for it, it comes in a hard case and has never been used. Over $500 paid total, this is a
great buy, here are some details on the nailer-
Patented Two-in-One Magazine and Driver System
This dual-purpose tool has a patented two-in-one magazine and driver system that accommodates both cleats and staples. Designed for 15.5- and 16-gauge staples from 1 to 2 inches, and "L" cleats from 1-1/2 to 2 inches, the magazine has a 100 staple/cleat capacity. Loading the fastener is quick and easy--simply pull the magazine back, drop in the fasteners, and release the drawer--it takes less than 10 seconds.

Precise Air-Powered Operation
The Ramsond RMM3 operates with the power of compressed air (60 - 120 PSI) and is equipped with a standard 1/4-inch NPT air inlet for easy compatibility. To use, simply attach your air compressor's hose to the RMM3's air inlet, then rest the nose of the RMM3 squarely against your work surface to fire.

The direction and angle of the staple/cleat will be automatically aligned for precision driving. And with only a slight strike of the mallet upon the actuator, the RMM3 will shoot a cleat nail or staple through your flooring at the proper angle and depth.

Patented Air-Booster Chambers
Most conventional flooring nailers/staplers store compressed air within the body of the tool. Upon mallet strike, the air reserved in the body of the tool is released, driving the blade and shooting the fastener. The RMM3 takes this design one step further. In addition to storing compressed air inside its body, the RMM3 continuously stores compressed air in two patented air acceleration/booster chambers located in the handle.

By storing extra compressed air, these sealed chambers ensure that the fasteners shoot with sufficient force for perfect penetration in the flooring surface. The booster chambers also accommodate quicker retraction of the actuator and blade when compared with conventional units.

Non-Marring Base System
Featuring an adjustable non-marring base system, the RMM3 provides protection against scratches and allows you to drive fasteners fast and close to the wall. The base system is equipped with two composite disks in the front, a middle guide, and a rear nylon-derivative plate. The combination of these three mechanisms ensures that the surface of your hardwood flooring is not marred or damaged during installation. It also provides for tool balance and optimal positioning against the work surface for fast, accurate installation.

Works with Most Thicknesses of Hardwood Flooring
The RMM3 series is suitable for virtually all thickness of hardwood flooring (1/2 inch, 5/8 inch, 3/4 inch, and 25/32 inch). It comes with two nylon composite base plates--simply install the appropriate base plate for your application.

Durable and Comfortable
With over 30,000 units sold in North America, the RMM3 is sure to deliver on its promises. Designed for long-term use, the Ramsond RMM3 is an industrial-strength power tool that's comfortable to use. Its body is constructed of a durable, lightweight die-cast alloy, and its driver blade is constructed of heat-treated hardened steel for long-lasting resilience. For user comfort, the RMM3 has a long-reach handle with a padded cushioned grip that offers increased balance and control.

The RMM4 Two-in-One Hardwood Flooring Stapler and Cleat Nailer is manufactured under strict ISO guidelines for quality control and safety, and it is backed by a one-year warranty.

What's in the Box
Flooring Stapler/Cleat Nailer, mallet, goggles, bottle of oil, four Allen wrenches, internal key/wrench, O-ring kit, two nylon composite base plates, and a blow-molded carrying case.

This is a great set-up, everything is in like new condition! Loami is a couple miles outside of Springfield, IL. I will take Paypal or cash only. Thanks, for taking time to read this ad!

Contact Poster
* Your Email:
* Message:
* = Required information.

Related Posts

  Areas Safety Tips Tell A Friend Link Us Contact Us  

© 2016 - All Rights Reserved.